CLARK TRAILER, INC.
STEEL DROPDECK WITH AIR RIDE SPREAD
Model CDFB-WSA-09
LENGTH |
40ft - 53ft |
WIDTH |
96" - 102" |
5th WHEEL HEIGHT |
49" |
KING PIN |
Double Spool set @ 24" from front |
LANDING GEAR |
2-speed with 10"x10" sand shoes, heavy duty steel bracing in 2 directions for support and stability.Operating handle on roadside of trailer. |
SUSPENSION |
Air Ride widespread 122" |
AXLES |
5" OD x 5/8" wall, 25,000lbs capacity |
BRAKES |
16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket. |
WHEELS |
22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white. |
TIRE |
255/70R22.5 Generals |
FLOORING |
1-1/8" Apitong, finger jointed full length, ship-lapped. Flooring secured with two 5/16" screws per crossmembers. |
ELECTRICAL |
USA sealed harness with 7-way plug. Truck-Lite lights. 2 front marker lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and one 4" mid-turn light each side of trailer. |
MAIN FRAME |
24" deep fabricated automatic machine welded I-Beam with built in positive camber. 7/16" x 5" 130ksi top and bottom flanges with 3/16" belly web. The main rail is punched to fit the contour of a 4" Jr.I-beam one piece floor sill. |
SIDE RAIL |
6" deep structural steel channel @ 6.5# with pockets 1-11/16" x 3-1/4" ID spaced on 24" centers with 1-1/4" pipe spools between each pocket and 3/8" x 2" skid rail. |
CROSSMEMBERS |
4" high tensil steel I-beam on 18" centers (12"optional) |
PAINT |
Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint. |
MUD FLAPS |
CLARK anti-spray, anti-sail mounted on rear of trailer |
FRAME CAPACITY |
80,000lbs distributed frame rating |