Clark Trailer Service Inc.
Sunday, June 25, 2017

CLARK TRAILERS, INC.

OIL FIELD FLOAT
Model COFF-HD-09

LENGTH 38ft - 48ft
WIDTH 96" - 102"
5th WHEEL HEIGHT 50"
KING PIN Double Spool set @ 24" from front
LANDING GEAR Telescoping folding landing gear with winch
SUSPENSION Hutch H-900-50 Single point
AXLES 5" OD x 5/8" wall, 25,000lbs capacity
BRAKES 16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket.
WHEELS 22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white.
TIRE 11R24.5 14ply Generals
FLOORING 1-3/8" Apitong, finger jointed full length, ship-lapped. Flooring secured with two 5/16" screws per crossmembers.
ELECTRICAL USA sealed harness with 7-way plug. Truck-Lite lights.  2 front marker lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and one 4" mid-turn light each side of trailer.
MAIN FRAME 24" deep fabricated automatic machine welded I-Beam with built in positive camber. 3/4" x 6 top and bottom flanges with 1/4" belly web.  The main rail is punched to fit the contour of a 6" Jr.I-beam one piece floor sill.
SIDE RAIL 8’’ deep structural steel channel @ 8.5# with pockets 1-11/16’’ x 3-1/4’’ ID spaced on 24’’ centers with 1-1/4’’ pipe spools between each pocket and 3/8’’ x 3’’ skid rail
CROSSMEMBERS 6" high tensil steel I-beam on 12" centers
REINFORCEMENT 1/4’’x 3’’ flat bar welded to bottom of side rail on both side of trailer.
FRONT Square front with half round pipe and pick up eye.
REAR Rear skirt with 8-5/8’’ rolling tail pipe with self-aligning bearing supported by two extra heavy duty support rollers.
PAINT Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint.
MUD FLAPS CLARK anti-spray, anti-sail mounted on rear of trailer
FRAME CAPACITY 100,000lbs distributed frame rating. GAWR Tire rating determines legal load.