|
|
CLARK TRAILER, INC.
STEEL FLATBED WITH SPRING SLIDER
Model CFB-SL-09
| LENGTH |
40ft - 53ft |
| WIDTH |
96" - 102" |
| 5th WHEEL HEIGHT |
49" |
| KING PIN |
Double Spool set @ 36" from front |
| LANDING GEAR |
2-speed with 10"x10" sand shoes, heavy duty steel bracing in 2 directions for support and stability |
| SUSPENSION |
Hutch H-9000T inside I-beam slider with Hutch H-9700T side mount hanger with 3-leaf springs |
| AXLES |
5" OD x 5/8" wall, 25,000lbs capacity |
| BRAKES |
16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket. |
| WHEELS |
22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white. |
| TIRE |
11R22.5 14ply Generals |
| FLOORING |
1-1/8" Apitong, finger jointed full length, ship-lapped. Flooring secured with two 5/16" screws per crossmembers. |
| ELECTRICAL |
USA sealed harness with 7-way plug. Truck-Lite lights. 2 front marker lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and one 4" mid-turn light each side of trailer. |
| MAIN FRAME |
24" deep fabricated automatic machine welded I-Beam with built in positive camber. 7/16" x 5" 130ksi top and bottom flanges with 3/16" belly web. The main rail is punched to fit the contour of a 4" Jr.I-beam one piece floor sill. |
| SIDE RAIL |
6" deep structural steel channel @ 6.5# with pockets 1-11/16" x 3-1/4" ID spaced on 24" centers with 1-1/4" pipe spools between each pocket and 3/8" x 2" skid rail. |
| CROSSMEMBERS |
4" high tensil steel I-beam on 18" centers (12"optional) |
| PAINT |
Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint. |
| MUD FLAPS |
CLARK anti-spray, anti-sail mounted on rear of trailer |
| FRAME CAPACITY |
80,000lbs distributed frame rating. GAWR Tire rating determines legal load |
|
|
