CLARK TRAILER, INC.
COMPOSITE FLATBED WITH AIR RIDE SPREAD
Model CCFB-WSA-09
| LENGTH |
40' - 53' |
| WIDTH |
96" - 102" |
| FRAME CAPACITY |
80,000lbs distributed frame rating. |
| 5th WHEEL HEIGHT |
49" |
| KING PIN |
Double spook set @ 36" from front |
| LANDING GEAR |
2-speed with 10"x10" sand shoes; heavy duty steel bracing in 2 directions for support and stability. Operating handle on roadside of trailer. |
| SUSPENSION |
Air Ride widespread 122" |
| AXLES |
5" OD x 5/8" wall, 25,000lbs capacity |
| BRAKES |
16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket |
| WHEELS |
22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white |
| TIRE |
11R22.5 14ply Generals |
| FLOORING |
6005A-T6 Aluminum flooring with three (3) Apitong Nailers. |
| ELECTRICAL |
USA sealed harness with 7 way plug. Truck-Lite lights. 2 front markers lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and on4" mid-turn light each side of trailer. |
| MAIN FRAME |
24" deep fabricated automatic machine welded I-Beam with positive camber. 7/16"x5" 130ksi top and bottom flanges with 3/16" belly web. The main rail is punched to fit the contour of a 4: Jr. I-Beam one piece floor sill. |
| SIDE RAIL |
6005A-T6 Aluminum 6" deep side rail with double pipe spools and aluminum pockets on 24" centers. |
| RUBRAIL |
6005A-T6 3/8" x 3" Aluminum rubrail protects and reinforces the pocket. Indentation in rubrail provides a protective slot for 2" conspicuity tape. |
| CROSSMEMBERS |
4" high tensil steel Jr. I-beams on 16" centers. (12" optional) |
| PAINT |
Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint. |
| MUD FLAPS |
CLARK anti-spray, anti-sail mounted on rear of trailer |
| FRONT SKIRTS |
Heavy duty 6" extruded aluminum |
| HUBS & DRUMS |
Webb Pilot mounted 10 Stub hubs with cast steel outboard mounted drums |
POPULAR OPTIONS
Bulkheads, Aluminum (removable or permanent)
Winches, recessed or movable on aluminum track.
Floor sill spacking - 12" or 18" centers.
Tire Carrier.
Chain tie-downs recessed in floor
Suspensions: Air Ride slider, spring slider and spring spread.
Clark offers many other options to meet your specific hauling requirements.
